Electronics
Btrieve
Motorcycling
Software

Btrieve error 79 (programming error)

It is possible to receive this status code when there is a malfunction that Btrieve cannot specifically detect or from which Btrieve cannot recover. Retry the operation again. If the error persists, there may be a system corruption; try to clear the system by rebooting, and then try the operation again. One known cause is using Brequest simultaneosly in multiple DESQview session, to fix this raise number of network buffers to at least 16 (default is 8) using DVSETUP.

Back to index

Copyright © Madis Kaal 2000-