Btrieve error 91 (server error)

BREQUEST could not establish a session with the server. Either the NetWare Btrieve Record Manager has not been started or the server was not active. Verify that the NetWare Btrieve Record Manager is active on the server in question. The setting for the Number of Remote Sessions configuration option may be too low. Return to the server-base Btrieve Setup utility and specify a higher value for this option. A Btrieve DOS application may suddenly return this error after running successfully in the past. This may be resolved by refreshing the frame type entry in the registry at the NT Server. To do this, set the NWLINK IPX/SPX Compatible Transport to Auto Frame Type Detection, restart the server, and then reassign the specific frame type. The server must be restarted again before the setting takes effect.

Back to index

Copyright © Madis Kaal 2000-